Redarc BCDC1240-LV Bedienerhandbuch PDF herunterladen (Seite 6)

1 PRODUCT FUNCTION

1.6 Display Panel

The BCDC1240-LV has three Battery Type Settings available. These settings

enable optimal charging proﬁ les for the auxiliary battery. The battery type

selected is displayed via the LEDs on the front panel in the section ‘Battery Type’.

In addition to the battery type, the status of the charger is indicated via three

LEDs. The ‘Charging Status’ shows when the unit is in BOOST, ABSORPTION

or FLOAT. In order to give more information, the applicable LED will ﬂ ash to

indicate the output by the unit. The longer the ﬂ ash, the more current the charger

is putting out. If the LED is ON solid, then the unit is supplying a full 25A to the

auxiliary battery.

Standby mode is entered when the unit is not charging. In this mode, the Battery

Type LED will blink approx once per second; the charging status LEDs will be off.

In this mode, if the battery type wire is moved then the selected battery type will

update.

1.7 Error Codes

In the event of a fault with the unit, installation, either battery or solar panel,

both the External LED and ALL the LEDs on the unit will ﬂ ash to indicate the

fault type. Flashing sequences are described in the table below.

LED State Description

1 ﬂ ash (1 ﬂ ash followed by 3.5 second off) Internal Hardware Fault

2 ﬂ ash (2 ﬂ ash followed by 3.5 second off) Reserved

3 ﬂ ash (3 ﬂ ash followed by 3.5 second off) Unit over temp fault

4 ﬂ ash (4 ﬂ ash followed by 3.5 second off) Output Battery Fault (Volts too high)

5 ﬂ ash (5 ﬂ ash followed by 3.5 second off) Input under voltage (Battery)

6 ﬂ ash (6 ﬂ ash followed by 3.5 second off) Input over voltage (Battery or Solar panel)

7 ﬂ ash (7 ﬂ ash followed by 3.5 second off) Reverse polarity

Figure 1.6.1 - BCDC1240-LV Front Panel

RoHS

Compliant

BCDC1240

12V 40A DC/DC

3 stage

battery charger

Designed and made in Australia

BATTERY TYPE CHARGE STATUS

AGM/gel

Standard

Calcium

Boost

Absorption

Float

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Keine Kommentare

Redarc BCDC1240-LV Bedienerhandbuch Seite 6